Products
Vornet offers industrial gate, globe, check, ball, control and API 6A valves, along with power station and pump protection valves. Explore our product range below and select by valve type, service conditions and project requirements.
69 products
Wedge Gate
Cast Steel Wedge Gate Valve
Full-open isolation for industrial process and pipeline service.
View Details
Wedge Gate
Bolted Bonnet Forged Steel Wedge Gate Valve
Compact forged construction for demanding pressure service.
View Details
Pressure Seal
Pressure Seal Cast Steel Gate Valve
Self-energizing bonnet sealing for high-temperature systems.
View Details
Parallel Gate
Forged Steel Pressure Seal Parallel Gate Valve
Forged parallel-disc design for severe high-pressure duty.
View Details
Slab Gate
API 6D Cast Steel Slab Gate Valve
Full-bore flow path for oil and gas transmission pipelines.
View Details
Mud Gate
Hard-Sealed Mud Gate Valve
Abrasion-resistant isolation for drilling fluid and slurry service.
View Details
Buried Service
Extended Stem Gate Valve
Extended operating stem for buried pipelines and remote access.
View Details
Slab Gate
Forged Steel Slab Gate Valve
Forged-body full-bore isolation for high-pressure pipelines.
View Details
Pressure Seal
Self-Sealing Wedge Gate Valve with Bypass
High-pressure wedge gate valve with bypass for controlled equalization.
View Details
Pressure Seal
Small-Diameter Forged Steel Parallel Gate Valve
Compact pressure-seal parallel design for high-pressure service.
View Details
Pressure Seal
Small-Diameter Forged Steel Wedge Gate Valve
Compact forged wedge design for severe-service systems.
View Details
Parallel Gate
Small-Diameter Parallel Gate Valve
High-pressure construction with parallel gate shutoff.
View Details
Parallel Gate
Cast Steel Parallel Double Disc Gate Valve
Cast-steel parallel double-disc isolation for demanding pipeline service.
View Details
Wedge Gate
API 602 Forged Steel Gate Valve
Compact forged gate valve for refinery, chemical and power service.
View Details
Wedge Gate
Bronze Gate Valve
Bronze isolation valve for water, seawater, marine and compatible industrial service.
View Details
Welded Gate
Fully Welded Gate Valve
Welded-body isolation valve for long-distance pipelines and demanding industrial service.
View Details
Forged Steel
High-Pressure Forged Steel Globe Valve
Compact forged construction for high-pressure lines.
View Details
Angle
Cast Steel Angle Globe Valve
Cast angle-pattern construction for directional flow control.
View Details
Angle
Forged Steel Angle Globe Valve
Forged angle-pattern design for severe high-pressure service.
View Details
Swing Check
Cast Steel Swing Check Valve
Reliable backflow prevention for process and pipeline duty.
View Details
Pressure Seal
Forged Steel Self-Sealing Check Valve
Forged pressure-seal construction for high-pressure systems.
View Details
Extraction
Swing Slow-Closing Extraction Check Valve
Controlled closing for turbine extraction steam protection.
View Details
Weighted Swing
Swing Weight-Loaded Check Valve
External weight assistance for stable closing performance.
View Details
High Pressure
Class 4500 Small-Bore Check Valve
For high-pressure steam and compact process piping.
View Details
Forged Steel
Forged Steel Bolted Bonnet Check Valve
For high-pressure refinery and process piping.
View Details
Trunnion
Cast Steel Trunnion Mounted Ball Valve
Stable ball support for larger sizes and higher pressures.
View Details
Top Entry
Top-Entry Trunnion Mounted Ball Valve
In-line access for inspection and maintenance.
View Details
Welded Body
Fully Welded Trunnion Mounted Ball Valve
Welded body construction for buried and transmission lines.
View Details
Buried Service
Direct-Buried Fully Welded Ball Valve
Buried-service isolation for long-distance transmission pipelines.
View Details
Trunnion
Forged Steel Soft-Sealed Trunnion Mounted Ball Valve
Forged construction with dependable soft-seat shutoff.
View Details
Metal Seated
Metal Hard-Sealed Trunnion Mounted Ball Valve
Metal-seated isolation for high-temperature and abrasive service.
View Details
Pigging
Pigging Ball Valve
Full-bore pipeline isolation compatible with pigging operations.
View Details
Three-Way
Three-Way Ball Valve
Quarter-turn flow diversion and mixing for process systems. Compare flow paths in our L-port vs. T-port 3-way ball valve guide.
View Details
Three-Way
Duplex 3-Way Ball Valve
Three-way flow switching for duplex and special process service.
View Details
Single Seat
Single-Seat Control Valve
Accurate modulating control with a compact single-seat trim.
View Details
Angle Control
Self-Operated Angle Flow Control Valve
Angle-pattern regulation for directional process piping.
View Details
Choke Valve
API 6A Choke Valve
Controlled pressure reduction for high-pressure upstream service.
View Details
Slab Gate
API 6A Slab Gate Valve
Full-bore wellhead isolation with slab-gate construction.
View Details
Test Valve
Hydrostatic Test Blank Valve
Isolation and pressure-test support for power plant piping.
View Details
Gate Valve
WC6 WC9 High-Temperature Power Station Gate Valve
High-temperature isolation for boiler and main steam duty.
View Details
Heater Valve
High-Pressure Heater Inlet & Outlet Valves
Purpose-built isolation for high-pressure feedwater heaters.
View DetailsCheck Valve
Extraction Steam Quick-Closing Check Valve
Rapid turbine protection against extraction steam reverse flow.
View Details
Gate Valve
F11 F22 F51 Gate Valve for Power Plant Isolation
Project-specific gate valve for on-off isolation in power plant piping.
View Details
Globe Valve
Power Station Globe Valve for Flow Isolation and Control
Project-specific globe valve for flow isolation or control duties.
View Details
Safety Valve
Angle Type Safety Valve for Overpressure Protection
Angle-pattern safety valve for project-specific overpressure protection.
View Details
Pump Protection
Automatic Recirculation Valve Series 1
Automatic minimum-flow protection for centrifugal pumps.
View Details
Pump Protection
Automatic Recirculation Valve Series 2
Integrated pump protection for demanding process systems.
View Details
Flow Diversion
Diverter Valve
Directional switching for pneumatic conveying and bulk material systems.
View Details
Flow Diversion
Three-Way Globe Valve
Three-port globe construction for regulated flow routing.
View Details
Quick Closing
Quick-Closing Globe Valve
Fast shutoff response for pipeline protection and emergency duty.
View DetailsSpecial Check
Piston Check Valve
Guided non-return protection for horizontal process pipelines.
View DetailsNo products match your search. Try another valve type or service.
Gate Valves — Selection & Procurement
Engineered for Demanding Service
Select the Right Gate Valve for Your Operating Conditions
Vornet supplies wedge, slab, parallel and pressure-seal gate valves for pipeline, refinery, chemical and power-generation projects. Materials, trims, actuation and testing can be configured to project specifications.
Configuration scope: The figures above describe the combined Vornet gate-valve portfolio, not the operating envelope of every model. Available size, pressure class, temperature, materials, end connections and applicable standards vary by valve type and configuration. Confirm the exact envelope against the approved model datasheet and quotation.
Procurement FAQ
Gate Valve Selection Questions
What information should buyers include in a gate valve inquiry?
Provide valve type, nominal size, pressure class, body and trim materials, process medium, design temperature, end connection, operating method, applicable standard, quantity and inspection or testing requirements.
How do wedge, slab, parallel and pressure-seal gate valves differ?
Wedge gate valves are widely used for isolation, slab and parallel designs provide a straight full-bore flow path for suitable pipeline duties, and pressure-seal bonnets are selected for high-pressure and high-temperature service. Final selection should follow the operating conditions and project specification.
Can Vornet configure gate valves for project requirements?
Materials, trim, actuation, testing and documentation can be configured to the confirmed project specification. Send the service data and required standards for technical review before quotation.
Start a Project
Send Us Your Gate Valve Specification
Include valve type, size, pressure class, materials, medium, temperature, quantity and required standard.
Globe Valves — Selection & Procurement
Engineered for Demanding Service
Flow regulation with robust shutoff
Straight, angle and Y-pattern globe valves are configured for steam, water, oil, gas and process lines.
Buyer Specification Guide
How to Specify Globe Valves for Your Project
1. Operating Data
Specify media, normal and design temperature, pressure class, nominal size, end connection, body and trim materials, leakage requirement and operating method.
2. Configuration Review
Choose straight-pattern designs for general throttling, angle-pattern designs where piping direction changes, or Y-pattern designs when lower pressure drop is important.
3. Quality Documents
Typical project documentation can include datasheets, drawings, material certificates, pressure-test records, inspection reports and export documentation.
Procurement Questions
What information should be included with an RFQ?
Include valve type, quantity, size, pressure class, medium, operating and design conditions, materials, end connections, actuation, applicable standards, inspection scope and required delivery date.
How should the globe valve pattern be selected?
Selection depends on piping layout, allowable pressure drop, throttling duty, temperature and maintenance access. Vornet reviews these conditions before recommending a straight, angle or Y-pattern configuration.
What documents can be supplied with the order?
Documentation is confirmed per project and may include approved drawings, datasheets, material certificates, pressure-test reports, inspection records, packing lists and export documents.
Start a Project
Send Us Your Globe Valves Specification
Include valve type, size, pressure class, materials, medium, temperature, quantity and required standard.
Check Valves — Selection & Procurement
Engineered for Demanding Service
Protect critical equipment from reverse flow
Swing, Y-pattern and pressure-seal check valves provide reliable non-return protection for pipeline, steam and severe-service systems.
Buyer Specification Guide
How to Specify Check Valves for Your Project
1. Operating Data
Specify media, flow direction, design pressure and temperature, pipe size, pressure class, allowable pressure drop and the consequence of reverse flow.
2. Configuration Review
Select swing designs for low-resistance pipeline duty, Y-pattern designs for steam or crystallizing media, and pressure-seal construction for severe high-pressure service. Compare operating behavior in our swing vs. spring check valve guide.
3. Quality Documents
Available project documentation can include drawings, material certificates, pressure-test records, inspection reports and export preparation files.
Procurement Questions
What information should be included with an RFQ?
Include valve type, quantity, size, pressure class, medium, operating and design conditions, materials, end connections, actuation, applicable standards, inspection scope and required delivery date.
Which check valve configuration fits the application?
The correct configuration depends on installation orientation, flow velocity, pressure drop, closing response and water-hammer risk. Vornet reviews the operating data before selection.
What documents can be supplied with the order?
Documentation is confirmed per project and may include approved drawings, datasheets, material certificates, pressure-test reports, inspection records, packing lists and export documents.
Start a Project
Send Us Your Check Valves Specification
Include valve type, size, pressure class, materials, medium, temperature, quantity and required standard.
Ball Valves — Selection & Procurement
Engineered for Demanding Service
Reliable shutoff with low operating torque
Floating, trunnion, welded, metal-seated and multi-way ball valves are configured for oil, gas, chemical and transmission service.
Buyer Specification Guide
How to Specify Ball Valves for Your Project
1. Operating Data
Specify media, design pressure and temperature, line size, pressure class, bore requirement, seat material, body construction, fire-safe requirement and actuation method.
2. Configuration Review
Floating designs suit compact general service, while trunnion-mounted, fully welded, metal-seated, DBB and pigging configurations address larger lines and severe pipeline duties.
3. Quality Documents
Project documentation can include datasheets, drawings, material certificates, pressure and seat-test records, inspection reports and export files.
Procurement Questions
What information should be included with an RFQ?
Include valve type, quantity, size, pressure class, medium, operating and design conditions, materials, end connections, actuation, applicable standards, inspection scope and required delivery date.
When should a trunnion-mounted design be used?
Trunnion support is commonly selected for larger sizes, higher pressures and lower operating torque. Seat design, body construction and service conditions must also be reviewed.
What documents can be supplied with the order?
Documentation is confirmed per project and may include approved drawings, datasheets, material certificates, pressure-test reports, inspection records, packing lists and export documents.
Start a Project
Send Us Your Ball Valves Specification
Include valve type, size, pressure class, materials, medium, temperature, quantity and required standard.
Control Valves — Selection & Procurement
Engineered for Demanding Service
Match control performance to the process condition
Self-operated regulators, single-seat control valves, throttle valves and angle flow-control designs support accurate process regulation and reliable plant operation.
Buyer Specification Guide
How to Specify Control Valves for Your Project
1. Operating Data
Provide process medium, minimum and maximum flow, inlet and outlet pressure, temperature, required Cv, shutoff class, actuator type, signal and fail position.
2. Configuration Review
The valve body pattern, trim, actuator and characteristic are selected from the required turndown, pressure drop, cavitation risk, noise limit and control accuracy.
3. Quality Documents
Engineering support can include sizing review, datasheets, drawings, material certificates, test records, inspection documents and export preparation.
Procurement Questions
What information should be included with an RFQ?
Include valve type, quantity, size, pressure class, medium, operating and design conditions, materials, end connections, actuation, applicable standards, inspection scope and required delivery date.
What information is needed to size a control valve?
Accurate sizing requires the fluid properties, flow range, upstream and downstream pressure, temperature, pipe size and required control range. Actuation and shutoff requirements are reviewed at the same time.
What documents can be supplied with the order?
Documentation is confirmed per project and may include approved drawings, datasheets, material certificates, pressure-test reports, inspection records, packing lists and export documents.
Start a Project
Send Us Your Control Valves Specification
Include valve type, size, pressure class, materials, medium, temperature, quantity and required standard.
API 6A Valves — Selection & Procurement
Engineered for Demanding Service
Oilfield pressure control built around API 6A service
Ball, choke, slab gate and check valves are configured for wellhead systems, high operating pressures and project-specific material classes.
Buyer Specification Guide
How to Specify API 6A Valves for Your Project
1. Operating Data
Specify working pressure, bore size, temperature class, material class, PSL, PR level, service medium, sour-service requirement, end connection and actuation.
2. Configuration Review
Ball, choke, slab-gate and check configurations are matched to wellhead, Christmas-tree and manifold duties after review of pressure-control and isolation requirements.
3. Quality Documents
Project documentation can include API 6A datasheets, drawings, material traceability, pressure-test records, inspection plans and export documentation.
Procurement Questions
What information should be included with an RFQ?
Include valve type, quantity, size, pressure class, medium, operating and design conditions, materials, end connections, actuation, applicable standards, inspection scope and required delivery date.
Which API 6A project parameters must be confirmed?
Working pressure, temperature class, material class, PSL, PR level, bore size, connection type and sour-service conditions should be confirmed before quotation and manufacture.
What documents can be supplied with the order?
Documentation is confirmed per project and may include approved drawings, datasheets, material certificates, pressure-test reports, inspection records, packing lists and export documents.
Start a Project
Send Us Your API 6A Valves Specification
Include valve type, size, pressure class, materials, medium, temperature, quantity and required standard.
Power Station Valves — Selection & Procurement
Engineered for Demanding Service
Built for demanding power-generation duty
Power-station gate, heater, test and quick-closing check valves support reliable operation in severe steam and feedwater service.
Buyer Specification Guide
How to Specify Power Station Valves for Your Project
1. Operating Data
Specify system location, medium, design pressure and temperature, line size, material grade, operating cycles, actuator requirements and required closing response.
2. Configuration Review
Configuration should reflect boiler, main-steam, feedwater, heater bypass or turbine-protection duty, together with thermal cycling and pressure-seal requirements.
3. Quality Documents
Deliverables may include project datasheets, drawings, material certificates, pressure-test records, inspection plans and export documentation.
Procurement Questions
What information should be included with an RFQ?
Include valve type, quantity, size, pressure class, medium, operating and design conditions, materials, end connections, actuation, applicable standards, inspection scope and required delivery date.
What operating data is critical for power-station valve selection?
Design pressure, maximum temperature, material grade, thermal cycling, differential pressure, operating frequency and required closing time are central to the engineering review.
What documents can be supplied with the order?
Documentation is confirmed per project and may include approved drawings, datasheets, material certificates, pressure-test reports, inspection records, packing lists and export documents.
Start a Project
Send Us Your Power Station Valves Specification
Include valve type, size, pressure class, materials, medium, temperature, quantity and required standard.
Other Valves — Selection & Procurement
Engineered for Demanding Service
Special valve solutions beyond the core product families
Vornet supplies automatic recirculation, flow-diversion, quick-closing and other special valve configurations for pump protection, pneumatic conveying and complex process systems.
Buyer Specification Guide
How to Specify Other Valves for Your Project
1. Operating Data
Describe the required function, medium, design pressure and temperature, flow rate, pipe size, installation space, response time, materials and actuation method.
2. Configuration Review
Pump-protection, diversion, quick-closing and special check-valve configurations are selected according to system function, corrosion risk and operating sequence.
3. Quality Documents
Vornet can prepare project datasheets, drawings, material certificates, test records, inspection reports and export documentation as required.
Procurement Questions
What information should be included with an RFQ?
Include valve type, quantity, size, pressure class, medium, operating and design conditions, materials, end connections, actuation, applicable standards, inspection scope and required delivery date.
How are special-purpose valves selected?
Selection starts with the required system function, then considers process conditions, installation constraints, materials, actuation, response time and documentation requirements.
What documents can be supplied with the order?
Documentation is confirmed per project and may include approved drawings, datasheets, material certificates, pressure-test reports, inspection records, packing lists and export documents.
Start a Project
Send Us Your Other Valves Specification
Include valve type, size, pressure class, materials, medium, temperature, quantity and required standard.