Brass Ball Valve for Utility Water Service
Solid-brass-bar-stock ball valve with NPT connections. Suitability for chloride-containing or marine utility water service is subject to alloy, temperature, velocity, sealing materials and project review.
| Size Range | 1/4″–4″ (DN8–DN100) |
|---|---|
| Pressure Rating | 600–1500 psi |
| Body Material | B62, etc. |
| Connection Type | NPT |
Frequently Asked Questions
The product specification lists MSS SP 110, ASME B16.34 and ANSI B1.20.1.
It is machined from solid brass bar stock without casting defects.
Suitability is reviewed against the specified alloy, complete water chemistry, temperature, pressure, flow velocity and sealing materials.
The visible technical specification lists NPT.
Provide the medium, chloride content where relevant, size, pressure, material requirement, NPT details, quantity and documentation.
Product Overview
The Vornet Brass Ball Valve is machined from solid brass bar stock rather than cast construction, avoiding the casting defects identified in the product specification.
It is designed, manufactured and tested to MSS SP 110, ASME B16.34 and ANSI B1.20.1.
The visible specification identifies solid brass bar stock, B62 material information and an NPT connection. Final media suitability is confirmed against the project datasheet and operating conditions.
- Solid Brass Bar Stock: Machined without casting defects.
- Project-Reviewed Service: Final suitability is confirmed against alloy, water chemistry, temperature, velocity and sealing requirements.
- NPT Connection: The visible connection type is NPT.
- Applicable Standards: MSS SP 110, ASME B16.34 and ANSI B1.20.1.
Related Product Selection Guides
← Back to Ball Valve ProductsDiscuss Your Brass Ball Valve Requirements
Send your medium and NPT connection requirements for technical review.