Angle Type Safety Valve for Overpressure Protection
An angle-pattern safety valve for automatic overpressure protection. Valve selection must be based on the purchaser’s set pressure, relieving conditions, required capacity, medium, back pressure, connection and governing specification.
| Valve Type | Angle Type Safety Valve | Primary Function | Overpressure protection |
|---|---|---|---|
| Set Pressure | To be specified in the RFQ | Required Relieving Capacity | To be specified in the RFQ |
| Medium & Relieving Temperature | To be specified in the RFQ | Back Pressure | To be specified in the RFQ |
| Connections | To be specified in the RFQ | Applicable Code or Standard | To be specified in the RFQ |
Configuration scope: Safety valve selection cannot be confirmed from nominal pipe size alone. Set pressure, relieving pressure and temperature, required capacity, medium properties, inlet conditions, built-up and superimposed back pressure, discharge arrangement and governing code must be reviewed before the valve configuration is confirmed.
Frequently Asked Questions
Provide the protected equipment or system, medium, set pressure, relieving pressure and temperature, required relieving capacity, inlet conditions, back pressure, connections and governing code.
Its basic function is automatic overpressure protection. The angle designation describes the inlet and outlet arrangement of the valve body.
No. Safety valve selection requires relieving-capacity calculations and complete operating data. Nominal pipeline size alone is not sufficient.
The required set pressure must be provided by the purchaser and reviewed together with the protected system and applicable specification before the order is confirmed.
Required setting or pressure-test records, material certificates, drawings, inspection documents and third-party inspection must be stated in the RFQ and confirmed in the order scope.
Product Overview
Vornet Angle Type Safety Valve is offered for project-defined overpressure protection. The angle-pattern body identifies the directional arrangement between the inlet and outlet; it does not by itself determine the valve capacity or suitability for a specific medium.
Selection is based on the purchaser’s relieving scenario and complete process data. Set pressure, relieving temperature, required capacity, medium properties, back pressure, connections and governing specification are reviewed before a configuration is offered.
The approved quotation and datasheet define the final valve selection, testing, certification and documentation requirements.
- Overpressure Protection: The valve function is based on the defined relieving scenario.
- Angle-Pattern Body: Inlet and outlet arrangement is confirmed from the selected configuration.
- Sizing Data Required: Set pressure and required relieving capacity must be supplied by the purchaser.
- Project Documentation: Testing and documentation are agreed in the order scope.
Related Power Station Valve Selection Guides
← Back to Power Station Valve ProductsDiscuss Your Power Station Valve Requirements
Send your operating conditions and project specifications for technical review and quotation.