
Forged Steel Trunnion Mounted Ball Valve
Product Description
Vornet’s trunnion mounted ball valve uses two-piece or three-piece forged steel split-body construction with soft seats for on-off isolation in natural gas, oil, petrochemical and chemical pipelines. This forged steel ball valve family covers NPS 2–60 (DN50–DN1500) and Class 150–2500. The ball is supported by trunnions, and the valve is intended to operate fully open or fully closed rather than as a throttling device.
Tight shutoff is essential in oil and gas applications. We manufacture our three-piece and two-piece trunnion mounted ball valves to high engineering and quality standards. These designs offer a secondary emergency sealant injection system as a standard feature, providing temporary sealing in damaged sealing areas. Vornet’s forged steel ball valve manufacturing also uses a wide variety of certified materials selected to resist sulfide stress cracking and improve performance in corrosive environments. Correct material selection for a soft seated ball valve is essential to address the combined effects of system pressure, application temperature, and elemental sulfur and chloride content.
Key Features
- Bi-Directional Isolation — Two-seat construction supports pipeline isolation from either end.
- Double Block and Bleed — DBB capability depends on the selected seats and cavity-bleed provisions.
- Cavity Pressure Relief — Self-relieving seats can relieve excess cavity pressure.
- Full or Reduced Bore — Either bore configuration can be specified according to the pipeline and project requirements.
- Fire-Safe Design — A secondary metal seating arrangement is described for loss of soft-seat material.
- Operating Options — Manual, pneumatic, electric, hydro-pneumatic and hydraulic operation can be reviewed against the required torque, actuator supply and operating duty.
General Information
| Size Range | NPS 2–60 (DN50–DN1500) |
|---|---|
| Pressure Rating | Class 150–2500 (PN16–PN420) |
| Body Material | Carbon steel, alloy steel, stainless steel, duplex steel, etc. |
| Temperature Range | −46°C to +200°C |
| Operation | Manual, pneumatic, electric, hydraulic, etc. |
| Design Standard | API 6D / ASME B16.34 |
| Face to Face Dimension | ASME B16.10 |
| Ends Connections | ASME B16.5 (RF/RTJ) / ASME B16.25 (BW) |
| Test & Inspection | API 598 |
Valve Project
Case Studies
Explore published Vornet ball valve project references. Each project has its own materials, pressure class, connections and service requirements.
View All Case StudiesRelated
Documents
Download the Vornet Ball Valve Product Catalog for reference. Submit it with your project datasheet to discuss forged steel trunnion mounted ball valve configuration and documentation.
Explore All Downloads ↗What body and seat configurations are offered for this forged steel trunnion ball valve?
The listed product uses two-piece or three-piece forged steel split-body construction with soft seats. Confirm the body arrangement, full or reduced bore, seat material and end connections on the project datasheet and approved drawing.
What does the DBB function support?
Double block and bleed capability concerns isolation at the two seats and bleeding the cavity between them. Confirm the pressure directions, seat design and verification test for the selected valve. DBB does not by itself establish the double isolation performance of a DIB design or a twin-ball assembly; cavity relief must match the actual seat arrangement.
Which standards are stated for this forged steel ball valve?
The listed design references are API 6D and ASME B16.34, with API 598 for test and inspection. Face-to-face dimensions are listed to ASME B16.10, RF/RTJ flanged ends to ASME B16.5 and BW ends to ASME B16.25. Confirm the applicable editions, leakage criteria and inspection scope. Any API 607 or API 6FA fire-test claim needs supporting documents for the supplied configuration; listing a standard does not establish certification.
How is the −46°C to +200°C range applied to this soft seated ball valve?
This is the listed product-family range, not a rating for every configuration or pressure class. The allowable pressure-temperature combination depends on the body, trim, soft-seat and seal materials and the actual medium. Confirm compatibility and differential-pressure limits against the selected configuration and approved datasheet.
What information is needed for a trunnion mounted ball valve quotation?
Send size, quantity, pressure class, medium, design and operating pressure and temperature, body and trim materials, seat and seal requirements, end connections, bore and actuation. Identify any H₂S, chloride or solids exposure, required DBB duty, inspection and documentation scope, and delivery requirements. Include the project datasheet and actuator supply details for technical review.










