
Cast Steel Globe Valve for Petroleum and Chemical Pipelines
Product Description
Vornet’s cast steel globe valves are used for flow regulation, frequent operation, increased flow resistance, or for positive shut off when closed. Globe valves are closing-down valves in which the closure member is moved squarely on and off the seat. By this mode of disc travel, the seat opening varies in direct proportion to the travel of the disc. This proportional relationship between valve opening and disc travel is ideally suited for duties involving the regulation of flow rate. Flanged globe valves can also be used for on-off duty, the seating load can be positively controlled with high sealing capacity.
Key Features
- Design Types: T-type, Y-type, angle type; bolted or pressure-seal bonnet
- Trim: Multiple material options; Stellite hard facing available
- Standard Graphite Packing
- Other gasket material can be made available
- Outside Screw & Yoke, Rising Stem, Flange End
General Information
| Size Range | NPS 2–24 (DN50–DN600) |
|---|---|
| Pressure Rating | Class 150–4500 (PN16–PN760) |
| Body Material | Carbon steel, stainless steel, alloy steel, duplex steel, etc. |
| Temperature Range | −46°C to +650°C |
| Operation | Handwheel / Gear / Electric, etc. |
| Design Standard | ASME B16.34 |
| Face to Face Dimension | ASME B16.10 |
| Ends Connections | ASME B16.5 (RF/RTJ) / ASME B16.25 (BW) |
| Test & Inspection | API 598 |
Selection note: These figures describe the product-family range, not a rating available in every size, material and pressure-class combination. Confirm the selected configuration, allowable pressure at the design temperature, end connections and applicable standards in the approved project datasheet.
Valve Project
Case Studies
Explore selected Vornet valve project news. These case studies show other valve configurations and do not document this cast steel globe valve.
View All Case StudiesRelated
Documents
Download valve catalogues and submit cast steel globe valve specifications for technical review.
Explore All Downloads ↗When is this cast steel globe valve suitable for a pipeline project?
This cast steel globe valve is intended for petroleum, chemical and other industrial pipelines. Review the medium, pressure, temperature, end connection and required throttling or shut-off function before selection.
How should the throttling-disc and stop-check-disc options be selected?
Throttling-disc and stop-check-disc configurations are available for different duties, subject to technical review. Confirm whether the project requires throttling duty or a stop-check function so the disc configuration can be reviewed accordingly.
What operating advantages does the valve design provide?
The published design features include low opening height, short stroke and short opening or closing time. Their suitability should be evaluated together with the selected size, pressure and operating method.
Can the actuation method be configured for the installation?
Listed operating options include manual, gear drive, pneumatic, electric and hydraulic actuation. Selection should consider valve size, operating frequency, available utilities and the project control requirement.
What information should be included with an inquiry?
For a cast steel globe valve quotation, provide the service medium, operating pressure and temperature, size, body material, end connection, disc function, actuation method, quantity and project documentation requirements.









