jessamynlee@vornetvalve.com / jessamyn@vornetvalve.com 📞 +86-17888190118 🌐 EN
Case Studies

Seal Stability Validation in Oilfield Production and Severe Erosive Service – VORNET High-Pressure Choke Valve Project Delivery and Application

2-9/16 inch 10000 PSI JLK947Y wellhead choke valve front view

Project Overview

VORNET recently completed the manufacture and delivery of 68 high-pressure choke valves, sized 2-9/16″ and rated to 10,000 psi, for a PetroChina gas field project.

In this project, the VORNET choke valves are used for wellhead choking. High pressure and solid particles create demanding service conditions and place additional demands on valve durability.

VORNET secured the project by meeting the required performance specifications while offering a more competitive delivery schedule and effective cost control.

Project Challenges

The process medium contains solid particles. Under erosive flow at 10,000 psi, valve trim made from conventional materials lasted only 3–5 days. Maintaining stable sealing performance over long-term operating cycles therefore became the project’s top priority.

Our Solution

  1. Tungsten carbide sealing components extend the service life of the sealing surfaces under these abrasive operating conditions.
  2. To address the high cost of tungsten carbide, the sealing assembly uses a split, detachable design. When the valve trim is damaged, the matching tungsten carbide sealing components can be removed and replaced.
Send Your Valve Specifications
Valve TypeThrottle Valve / Choke Valve
Size2-9/16″ (API Connection)
Pressure Rating10,000 PSI (69 MPa)
Design StandardAPI 6A
OperationElectric Actuator

Quality Control & Surface Treatment

Every choke valve undergoes rigorous pressure testing and inspection before shipment. A high-quality paint coating applied in our workshop provides excellent corrosion resistance for oilfield environments. Finished valves are individually tested and verified to ensure dimensional accuracy, seal integrity, and material traceability.

Photo 1 of 3
Is tungsten carbide trim required for media containing solid particles?

Yes, for the severe erosive conditions in this project. Solid particles can erode the valve trim and cause seal failure. In this case, the trim in the previous batch of valves was damaged by erosion after only three days of service.

How is maintenance handled when valve service life is short under these conditions?

VORNET choke valves use a replaceable plug and disc design. For later maintenance, the worn components can be removed and replaced with new internal parts.

Does this choke valve leak when fully closed?

No. While some choke and control valves allow leakage in the closed position, VORNET choke valves can achieve zero leakage when fully closed.

What aftersales support does VORNET provide?

If a problem results from valve design or manufacturing, VORNET will proactively follow up and arrange valve replacement.