10″ 2500LB Trunnion-Mounted Ball Valve | A Solution for High-Pressure, Sour H₂S Wellhead Service in Malaysia

Project Overview
VORNET recently supplied a 10-inch, Class 2500 trunnion-mounted ball valve for a project in Malaysia, serving high-pressure oil and gas wellheads and compressor inlet and outlet isolation. The valve was designed to API 6D and pressure-tested to API 598.
The A105N forged steel body is normalized after forging to improve impact toughness and the consistency of mechanical properties. It meets NACE MR0175 requirements for service with sour oil and gas containing H₂S.
RTJ ring-type joint flanges maintain reliable sealing under extreme temperature fluctuations and cyclic pressure conditions. Manufactured to ASME B16.5, the flanged connections meet the applicable PETRONAS oil and gas project engineering requirements and support interchangeability with corresponding international piping standards. The compact body design offers lower weight than conventional high-pressure ball valves while maintaining reliable sealing, reducing transport costs and simplifying subsequent inspection and maintenance.
Send Your Valve Specifications| Valve Type | Trunnion-Mounted Fixed Ball Valve |
|---|---|
| Size | NPS 10 |
| Pressure Class | 2500LB |
| Body Material | A105N |
| Connection | ASME B16.5 Flanges, RTJ |
Quality Control & Surface Treatment
All forgings are heat-treated and supplied with complete inspection reports. Before shipment, each valve undergoes rigorous visual inspection and pressure testing. Manufactured to API 6D, the valves in this order passed hydrostatic shell and seat sealing tests performed to API 598. Full material traceability is maintained, and each unit is supplied with a documented test report.
The paint system is applied in two stages: a primer followed by a topcoat. Finished surfaces are checked for visible defects and coating quality, providing a smooth finish with good paint adhesion.
What is a trunnion ball valve?
A trunnion ball valve is a type of quarter-turn valve where the ball is supported by a fixed shaft (trunnion) at both the top and bottom. Unlike floating ball valves, the trunnion design absorbs the line pressure through the shaft bearings, reducing operating torque and seat wear. This makes trunnion mounted ball valves ideal for high-pressure and large-diameter applications.
How does a trunnion ball valve work?
When the valve operator turns the stem, the ball rotates within the seats. The trunnion keeps the ball in a fixed position while the seats move against the ball surface, creating a tight seal. This design ensures reliable shut-off even under extreme differential pressure conditions, which is why trunnion ball valves are widely used in oil and gas pipelines, wellhead equipment, and high-pressure flow control systems.
What is the difference between a trunnion ball valve and a floating ball valve?
In a floating ball valve, the ball is only held by the stem and is pushed against the downstream seat by line pressure. In a trunnion ball valve, the ball is mechanically anchored by a trunnion shaft, so line pressure does not push the ball against the seat. This makes trunnion valves better suited for high-pressure, large-bore, and critical service applications where low operating torque and long service life are required.
Why choose Vornet Valve as your trunnion ball valve manufacturer?
As a professional trunnion ball valve manufacturer, Vornet Valve delivers designed to applicable API 6D requirements products with full material traceability and documented pressure test reports. We offer custom configurations including RTJ flanges, bevel gear operators, and special materials (A105N, LF2, F316, etc.) across pressure classes from 150LB to 2500LB. Every valve is backed by our commitment to quality and on-time delivery.



